Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 840.01, 840.02 — Lexmark X466de

Code: 840.01, 840.02

Description: 840.01 Scanner disabled Scanner disabled: the scanner is disabled and cannot be used. 840.02 Scanner auto disabled
Remedy: 1 POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Select “Enable ADF/FB -Enabled and press to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error recur? Go to step 2. Stop. Problem resolved. 2 Re-enter Configuration mode, scroll to and select the Disable Scanner menu item. Does the screen display ADF Disabled or Auto Disabled? Go to step 3. Go to step 8. 3 Check the ADF cable connections on the ADF relay card and connector J4 on the controller board. Also inspect the cable connections on JFBM1, J1 and J2 on the controller board. Are the connections properly connected? Go to step 5. Go to step 4. 4 Properly connect the connections on the ADF relay card and controller board. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Select “Enable ADF/FB -Enabled and press to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error recur? Go to step 5. Stop. Problem solved. 5 Check the continuity on the ADF cable. Is there continuity? Go to step 7. Go to step 6. 6 Replace the ADF cable. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Select “Enable ADF/FB -Enabled and pressto save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error recur? Go to step 7. Stop. Problem solved. 7 Replace the ADF unit. See “ADF removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Select “Enable ADF/FB -Enabled and pressto save the change. POR the MFP to operating mode. Run a copy from the ADF. Did the 840.xx error recur? Go to step 8. Stop. Problem solved. 8 Inspect JFBM1, J1 and J2 on the controller board. Are the connections properly connected? Go to step 10. Go to step 9. 9 Properly connect all the connections. Did the 840.xx error recur? Stop Problem solved. Go to step 10. 10 Replace the flatbed unit. See “Flatbed removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Select “Enable ADF/FB -Enabled and pressto save the change. POR the MFP to operating mode. Run a copy from the flatbed. Did the 840.xx error recur? Go to step 11. Stop. Problem solved. 11 Replace the controller board. See “Controller board removal”. Did this fix the problem? Problem solved. Contact second-level support.

← Xem tất cả mã lỗi Lexmark X466de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie