Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E6 — Lexmark X500n

Code: E6

Description: Service Call Transfer Cleaner Solenoid Improper cleaning roller clutch cable connection or a shorted or cut cable.
Remedy: 1 Turn printer off, and remove printer right cover. See “Right cover removal”. Is cable properly connected to cleaning roller clutch? Go to step 2. Properly connect cable. If problem persists, go to step 2. 2 Disconnect transfer belt cleaning roller clutch from cable. Measure resistance between two outer pins on cleaning roller clutch. Does resistance measure between 198 and 242 ohms? Go to step 3. Replace faulty cleaning roller clutch. See “Cleaning roller clutch removal”. 3 Remove engine controller board shield. See “Engine controller board removal” for steps to remove shield. Disconnect cable from MCN4 on engine controller board. Check cable continuity from MCN4 pins 1 and 2 (cable) to connector that attaches to cleaning roller clutch. Ensure that pins are not shorted. Is cable okay? Replace engine controller board. See “Engine controller board removal”. If problem persists, replace faulty cleaning roller clutch. See “Cleaning roller clutch removal”. Replace cable. If problem persists, replace faulty cleaning roller clutch. See “Cleaning roller clutch removal”.

← Xem tất cả mã lỗi Lexmark X500n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie