Code: LL
Description: Service Call Laser Unit Assembly Laser power is lower than the output limit.
Remedy: 1 Check LCN connection on laser assembly LDU board. Is connector properly connected? Go to step 2. Properly connect LCN cable. If error clears, problem solved, otherwise go to step 2. 2 Check LCN connection on engine controller board. Is cable properly connected? Go to step 3. Properly connect LCN cable. If error clears, problem solved, otherwise go to step 3. 3 Check cable that connects engine controller board LCN and LDU LCN connectors for continuity and shorted pins. Is cable okay? Replace laser unit assembly. “Upper right rear cover removal”. Go to step 4. Replace cable. Go to step 4. 4 Does error clear? Problem solved. Replace engine controller board. See “Engine controller board removal”.