Code: 006
Description: Service Call Scanner Unit Scanner unit initialization failed. Home position not found. Possible scanner calibration failure.
Remedy: 1 Check to see if the flatbed is locked. Is it locked? Unlock the flatbed. Go to step 2. 2 Ensure that the flatbed motor cable (JFB1) is connected. Is the cable connected? Go to step 3. Properly connect the cable. 3 Check pin 1 in J-FB1 for voltage. The voltage is only present when a copy job is running. The voltage should measure 5V. Is voltage present? Replace the flatbed unit. See “Flatbed assembly removal”. Replace the system board. See “System board removal”.