Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E7 — Lexmark X502n

Code: E7

Description: Service Call P feed Clutch Tray 1 Improper paper-feed clutch cable connection or a shorted or cut cable.
Remedy: 1 Turn printer off, and remove printer right cover. See “Right cover removal”. Is cable properly connected to paper feed clutch? Go to step 2. Properly connect cable. If problem persists, go to step 2. 2 Disconnect paper feed clutch from cable. Measure resistance between two outer pins on paper feed clutch. Does resistance measure between 119 and 145 ohms? Go to step 3. Replace faulty paper feed clutch. See “Clutch removal”. 3 Remove engine controller board shield. See “Engine controller board removal” for steps to remove engine controller board shield. Disconnect cable from MCN4 on engine controller board. Check cable continuity from MCN4 pins 9 and 10 (cable) to outer pins on connector that attaches to paper feed clutch. Ensure that pins are not shorted. Is cable okay? Replace engine controller board. See “Engine controller board removal”. If problem persists, replace faulty paper feed clutch. See “Clutch removal”. Replace cable. If problem persists, replace faulty paper feed clutch. See “Clutch removal”.

← Xem tất cả mã lỗi Lexmark X502n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie