Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E8 — Lexmark X502n

Code: E8

Description: Service Call Registration Clutch Improper registration clutch cable connection or a shorted or cut cable.
Remedy: 1 Turn printer off, and remove printer right cover. See “Right cover removal”. Is cable properly connected to registration clutch? Go to step 2. Properly connect cable. If problem persists, go to step 2. 2 Disconnect registration clutch from cable. Measure resistance between two outer pins on paper feed clutch. Does resistance measure between (****check these values) 119 and 145 ohms? Go to step 3. Replace registration clutch. See “Clutch removal”. 3 Remove engine controller board shield. See “Engine controller board removal” for steps to remove engine controller board shield. Disconnect cable from MCN4 on engine controller board. Check cable continuity from MCN4 pins 7 and 8 (cable) to outer pins on connector that attaches to registration clutch. Ensure that pins are not shorted. Is cable okay? Replace engine controller board. See “Engine controller board removal”. If problem persists, replace faulty registration clutch. See “Clutch removal”. Replace cable. If problem persists, replace faulty registration clutch. See “Clutch removal”.

← Xem tất cả mã lỗi Lexmark X502n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie