Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F5 — Lexmark X502n

Code: F5

Description: Service Call HV Power Supply Unit Output (BRV) of HVPS is shorted, and or HVPS cable connector is improperly connected.
Remedy: 1 Remove photodeveloper cartridge, and ensure charging unit on bottom of photodeveloper cartridge is not damaged. Is charging unit damaged? Replace photodeveloper cartridge. See “Photodeveloper cartridge removal”. Note: photodeveloper cartridge is a customerordered part. Go to step 2. 2 Check charging unit high voltage contacts in printer. Are they clean? Go to step 3. Clean contacts. If problem persists, go to step 3. 3 Replace photodeveloper cartridge. See “Photodeveloper cartridge removal”. Has error cleared? Note: photodeveloper cartridge is a customer-ordered part. Problem solved. Go to step 4. 4 Check cable for continuity between engine controller board connector HVCN and HVPS BCN1 connector and for shorted pins. Is cable okay? Go to step 5. Replace cable. 5 Replace HVPS. See “High voltage power supply (HVPS) removal”. Has error cleared? Problem solved. Go to step 6. 6 Replace engine controller board. See “Engine controller board removal”. Has error cleared? Problem solved. Contact higher level support.

← Xem tất cả mã lỗi Lexmark X502n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie