Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 840.01, 840.02 — Lexmark X546dtn

Code: 840.01, 840.02

Description: 840.01 Scanner disabled The scanner is disabled and can’t be used. Enter the configuration menu, and reenable the scanner module. 840.02 Scanner auto disabled The scanner is disabled and can’t be used. This message is posted when the MFP PORs. Enter the configuration menu, and re-enable the scanner module.
Remedy: 1 POR the device into Configuration mode. Go to Disable Scanner and select Enabled. See “Disable Scanner”. POR the device into operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error reoccur? Go to step 2. Stop. Problem resolved. 2 Re-enter Configuration mode, navigate to the Disable Scanner. Does the screen display ADF Disabled or Auto Disabled? Go to step 3. Go to step 8. 3 Check the ADF cable connections on the ADF relay card and the RIP board. Also inspect JFBM1, JHS1 and JCCD1 on the RIP board. Are the connections properly connected? Go to step 5. Go to step 4. 4 Properly connect the connections on the ADF relay card and RIP board. POR the device into Configuration mode. Go to Disable Scanner and select Enabled. See “Disable Scanner”. POR the device into operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error reoccur? Go to step 5. Stop. Problem solved. 5 Check the continuity on the ADF cable. Is there continuity? Go to step 7. Go to step 6. 6 Replace the ADF cable. POR the device into Configuration mode. Go to Disable Scanner and select Enabled. See “Disable Scanner”. POR the device into operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error reoccur? Go to step 7. Stop. Problem resolved. 7 Replace the ADF unit. See “Duplex ADF removal”. POR the device into Configuration mode. Go to Disable Scanner and select Enabled. See “Disable Scanner”. POR the device into operating mode. Run a copy from the ADF. Did the 840.xx error reoccur? Go to step 8. Stop. Problem resolved. 8 Inspect JFBM1, JHS1 and JCCD1 on the RIP board. Are they properly connected? Go to step 10. Go to step 9. 9 Properly connect all the connections. Did the 840.xx error reoccur? Stop Problem solved. Go to step 10. 10 Replace the flatbed unit. See “Flatbed removal”. POR the device into Configuration mode. Go to Disable Scanner and select Enabled. See “Disable Scanner”. POR the device into operating mode. Run a copy from the flatbed. Did the 840.xx error reoccur? Go to step 11. Stop. Problem resolved. 11 Replace the RIP board. See “RIP board removal”. Did this fix the problem? Problem resolved. Contact your next level of support.

← Xem tất cả mã lỗi Lexmark X546dtn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie