Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 109.xx — Lexmark X548de

Code: 109.xx

Description: Service Black Printhead Black printhead error 109.01 Service Black Printhead The black printhead lost HSYNC. 109.02 Service Black Printhead The black printhead failed to complete servo. 109.03 Service Black Printhead The black printhead mirror motors failed to achieve lock. 109.04 Service Black Printhead The black printhead mirror motors lost PLL motor lock. 109.05 Service Black Printhead Failure reading NVRAM from printhead. 109.08 Service Black Printhead The black laser showed bad in EMS testing. 109.11Service Black Printhead Failure writing data to printhead. 109.12 Service Black Printhead Failure reading data from the printhead. 109.13 Service Black Printhead Printhead declared error.
Remedy: 1 Turn the printer off, and remove the rear shield. See “Rear shield removal”. Check the cable at JMIRR1 for proper connection to the RIP board, the printhead cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the printhead. See “Printhead removal”. Go to step 2. 2 Turn the printer on, and verify the following values at JMIRR1: Are the values approximately correct? Replace the printhead. See “Printhead removal”. Replace the RIP board See “RIP board removal”.

← Xem tất cả mã lỗi Lexmark X548de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie