Code: 042-326
Display: Motor Error Error 042-326 Restart Printer
Description: <IOT Motor Failure> A sub motor failure is detected.
Remedy: 1 Check the toner cartridges for proper installation. Are the toner cartridges installed correctly? Go to step 3. Reinstall the toner cartridges. Then go to step 2. 2 Does the error still occur when the power is turned on? Go to step 3. Problem resolved. 3 Check the P/J22 and P/J221 connections between the controller board and the main drive assembly. Are the connectors secure? Go to step 4. Reconnect the connectors P/J22 and P/J221. Then go to step 4. 4 Check the sub motor by performing the Sub Motor Test: 1. In Service Mode, select Printer Diag, and press OK. 2. Select Engine Diag, and press OK. 3. Select Motor Test, and press OK. 4. Select Sub Motor, and press OK. 5. Open the front cover, and remove all the toner cartridges. 6. Bypass the interlock on the front cover. 7. Select the speed with or to perform the test (FULL1, FULL2, HALF, and LOW). 8. Press OK to begin the test. For example, Sub Motor (Full2). EXEC While the test is executing, you should hear the motor running. Does the main motor function correctly? Replace the controller board. See “Controller board removal”. Go to step 5. 5 Check the main drive assembly installation. Is the main drive assembly installed correctly? Go to step 6. Reinstall the main drive assembly. See “Main drive removal”. Then go to step 6. 6 Does the error still occur when the power is turned on? Go to “Main drive assembly (sub motor) service check”. Problem resolved.