Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 092-651 — Lexmark X560

Code: 092-651

Display: ADC Sensor Error Error 092-651 Error Code:01 Restart Printer
Description: <IOT ADC Sensor Error> Density sensor (ADC sensor) detects high density.
Remedy: 1 Is the transfer belt assembly installed correctly? Go to step 3. Reinstall the transfer belt assembly. See “Transfer belt removal”. Then go to step 2. 2 Does the error still occur when the power is turned on? Go to step 3. Problem resolved. 3 Check the toner density. Compare the density of the four colors by printing the Graduation ESS Test Page. 1. In Service Mode, select Printer Diag. 2. Select Test Print, and press OK. 3. Select the desired test page, and press OK. Ready displays. 4. Press OK to print the test page. Processing displays and then the page prints. Ready displays when the page is complete. Compare the results against the sample page, “Gradation ESS”. Is the toner too dark? Go to step 4. Replace the controller board. See “Controller board removal”. 4 Check the density solenoid in the transfer belt assembly by performing the ADC (CTD) Sensor Solenoid Test: 1. In Service Mode, select Printer Diag, and press OK. 2. Select Engine Diag, and press OK. 3. Select Motor Tests, and press OK. 4. Select ADC (CTD) Sensor Solenoid. 5. Open the front cover. 6. Bypass the front cover interlock. 7. Press OK to start the test. You will see the shutter move if the solenoid is functional. Does the density sensor operate correctly? Replace the corresponding toner cartridge assembly. See “Toner cartridge removal”. Go to step 5. 5 Check the P/J27, P/J272, and P/J2721 connectors between the controller board and the transfer belt assembly. Are the connectors connected correctly? Go to step 6. Reconnect the P/J27, P/J272, and/or P/J2721 connectors. Then go to step 6. 6 Disconnect P/J27 on the controller board. Measure the voltage between ground and J27-A7 pin on the controller board. It should measure approximately +5 V dc. Does the voltage measure approximately +5 V dc? Replace the transfer belt assembly. See “Transfer belt removal”. Replace the controller board. See “Controller board removal”.

← Xem tất cả mã lỗi Lexmark X560

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie