Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 929.00, 929.66, 929.67 — Lexmark X642e

Code: 929.00, 929.66, 929.67

Description: 929 .00 Toner sensor error—a problem has been detected with the toner sensor 929 .66 An error has been detected. No home windows has been detected. • Check toner cartridge. • Check toner sensor 929 .67 No toner sensor transition. • Check toner sensor • Check toner cartridge
Remedy: 1 Developer drive assembly Incorrect operation of the developer drive assembly can cause the printer to display a 929.xx error code (Toner Sensor). Check the developer drive assembly for correct installation or, any sign of worn, loose, or broken parts. 2 Front harness cable Check the toner sensor portion of the front harness cable to make sure it is properly seated into the toner sensor. If correct at both the sensor and system board (J15), check the continuity of the cable. If incorrect, replace the cable. 3 Toner sensor The toner sensor cable is part of the front harness and part of connector J15 on the system board. Check the voltage at J15-11. It reads approximately +5 V dc. If incorrect, replace the system board. If correct, check the voltage at J15-12. It reads approximately +5 V dc with the system board removed from the printer. If incorrect, replace the system board. If correct, replace the toner sensor assembly. A bad ground connection between J15-13 on the system board and pin 3 on the toner sensor results in a 929 service error.

← Xem tất cả mã lỗi Lexmark X642e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie