Description: Motor Error HCIT elevator motor error.
Remedy: 1 Is the paper properly loaded in the highcapacity input tray (HCIT)? Go to step 2. Fan the media, and then stack flat in the HCIT drawer. 2 1. Turn the printer off. 2. Reseat option tray 5. 3. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays. 4. Touch PRINT TESTS. 5. Touch HCIT. 6. Touch Single. Did the page print? Problem resolved. Go to step 3. 3 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the option cable in connector JOPT1 on the system board for proper connection, for cable pinch points, and for any other damage to the cable or connector Is the cable damaged? Replace the option cable. See “Option cable removal”. Go to step 4. 4 1. Remove the HCIT right cover. See “HCIT right cover removal”. 2. Check the cable in the HCIT. Is the cable damaged? Replace the elevator-up cable. See Replace the elevator motor motor. See “HCIT elevator motor with sensor removal”.