Description: POST Error Cartridge motor 1 (top) not connected.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Reseat the cables in connectors JCARTP1 and JCARTS1. Did the error clear? Problem resolved. Go to step 2. 2 Check the cables in connectors JCARTP1 and JCARTS1 for pinch points and any other damage to the cables or connectors. Is the cable damaged? Replace the cartridge motor 1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 3. 3 1. Remove the right cover. See “Right cover removal”. 2. Check for the cartridge 1/fuser motor cable (A) for proper connection to the EP drive assembly, pinch points for the cable, or any other damage to the cable or connector. Is either cable (A) damaged? Replace the cartridge motor 1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 4. 4 Measure the continuity across all of the fuses on the system board. Are any of the fuses blown? Replace the system board. See “System board removal”. Go to step 5. 5 Plug in a new EP drive assembly cartridge motor 1 with the old cable from outside the machine. Does the problem persist? Go to step 6. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”. 6 Plug in a new EP drive assembly cartridge motor 1 with a new cable from outside the machine. Does the problem persist? Replace the system board. See “System board removal”. Replace the cartridge motor 1/fuser cable. See “Cartridge motor 1/fuser cable removal”.