Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.12 — Lexmark X736

Code: 920.12

Description: POST Error One toner sensor is not connected.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Reseat the cable in connector JHVPS1. Did the error clear? Problem resolved. Go to step 2. 2 Check the HVPS cable in connector JHVPS1 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the HVPS cable. See “High-voltage power supply (HVPS) cable removal”. Go to step 3. 3 1. Remove the left cover. See “Left cover removal”. 2. Reseat and check all the toner level sensor cables (A) connected to the rear of the HVPS for damages and if they are installed correctly. Does the problem persist? Go to step 4. Problem resolved. 4 Connect four new toner level sensors outside the machine and perform a POR. Note: Keep track of which sensors change the error code to reduce the number of failing sensors. Keep the old sensor which does not reduce the failing number, leaving three new sensors and no error reported. Does the problem persist? Go to step 5. Replace the failing toner level sensor. See “Toner level sensor removal”. 5 Replace the HVPS board. See “High-voltage power supply (HVPS) removal”. Did the error clear? Problem resolved. Go to step 6. 6 1. Install the old HVPS back to the machine. 2. Replace the HVPS cable. See “Highvoltage power supply (HVPS) cable removal”. Does the problem persist? Replace the system board. See “System board removal” Problem resolved.

← Xem tất cả mã lỗi Lexmark X736

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie