Description: Motor Error Tray 2 feed motor failed.
Remedy: 1 1. Turn the printer off. 2. Reseat option tray 2. 3. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays). 4. Touch PRINT TESTS. 5. Touch Tray 2. 6. Touch Single. Did the page print? Problem resolved. Go to step 2. 2 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the option cable in connector JOPT1 on the system board for proper connection, for cable pinch points, and for any other damage to the cable or connector Is the cable damaged? Replace the option cable. See “Option cable removal”. Go to step 3. 3 1. Remove the right cover. See “Right cover removal”. 2. Check the option cable for pinch points and any damage. Is the cable damaged? Replace the option cable. See “Option cable removal”. Go to step 4. 4 Is the option tray 2 the high-capacity input tray (2,000-sheet feeder)? Replace the HCIT top plate assembly. See “Top plate assembly removal”. Replace the option tray 2 assembly.