Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 168.xx — Lexmark X738dte

Code: 168.xx

Description: Motor Error HCIT elevator motor error.
Remedy: 1 Is the paper properly loaded in the highcapacity input tray (HCIT)? Go to step 2. Fan the media, and then stack flat in the HCIT drawer. 2 1. Turn the printer off. 2. Reseat option tray 5. 3. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays. 4. Touch PRINT TESTS. 5. Touch HCIT. 6. Touch Single. Did the page print? Problem resolved. Go to step 3. 3 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the option cable in connector JOPT1 on the system board for proper connection, for cable pinch points, and for any other damage to the cable or connector Is the cable damaged? Replace the option cable. See “Option cable removal”. Go to step 4. 4 1. Remove the HCIT right cover. See “HCIT right cover removal”. 2. Check the cable in the HCIT. Is the cable damaged? Replace the elevator-up cable. See Replace the elevator motor motor. See “HCIT elevator motor with sensor removal”.

← Xem tất cả mã lỗi Lexmark X738dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie