Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 156.01, 156.03 — Lexmark X746

Code: 156.01, 156.03

Description: Motor Error COD (Color On Demand) motor failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JBOR1 on the system board for proper connection, for cable pinch points, and for any other damage to the cable or connector. Is the cable damaged? Replace the COD assembly. See “Color on demand assembly removal”. Go to step 2. 2 Measure the continuity across all of the fuses on the system board. Are any of the fuses blown? Replace the system board. See “System board removal”. Go to step 3. 3 1. Disconnect the cable in connector JBOR1 and then connect the cable from the new COD group assembly. 2. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays. 3. Touch MOTOR TESTS. 4. Touch COD. 5. Touch Forward or Reverse. See “Motor tests”. Did the COD motor pass the test? Replace the COD assembly. See “Color on demand assembly removal”. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark X746

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie