Description: 920.15 POST Error Bad transfer module NVRAM data. 920.20 POST Error Incompatible transfer module.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the JTPS1 connector for any damage, and then reseat the JTPS1 cable. 4. Check the transport cable connection to the transport belt for any damages. a.Open the front door cover b.Reseat the transport cable in the transfer belt module. Did the error clear? Problem resolved. Go to step 2. 2 Replace the transfer belt module. See “Transfer module removal”. Does the problem persist? Go to step 3. Problem resolved. 3 Connect a new transport cable from outside of the machine. Does the problem persist? Return the old transport belt module and old transport cable then replace the system board. See “System board removal”. Return the old transport belt module and replace the transport cable. See “Transport cable removal”.