Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 155.01, 155.03 — Lexmark X748

Code: 155.01, 155.03

Description: Motor Error Cam motor failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the motor driver cable in connector JDVR1 on the system board for proper connection, for cable pinch points, and for any other damage to the cable or connector. Is the cable damaged? Replace the motor driver cable. See “Motor driver cable removal”. Go to step 2. 2 1. Remove the right cover. See “Right cover removal”. 2. Check the motor driver cable (A) in connector JDVR1 on the system board for proper connection, for cable pinch points, and for any other damages to the cable or connector. Is the cable damaged? Replace the motor driver cable. See “Motor driver cable removal”. Go to step 3. 3 Check the CAM motor cable from the cam motor to the motor driver card for poor connections or damage. Is the cable damaged? Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”. . Go to step 4. 4 Measure the continuity across all of the fuses on the system board. Are any of the fuses blown? Replace the system board. See “System board removal”. Go to step 5. 5 Visually inspect the motor driver card. Is the motor driver card damaged? Replace the motor driver card. See “Motor driver card removal”. Go to step 6. 6 1. Connect a new motor driver card without mounting it to the printer. 2. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold buttons 3 and 6, then turn on the printer). 3. Touch MOTOR TESTS. 4. Touch CAM. Did the motor run? Install the new motor driver card. Go to step 7. 7 1. Reinstall old motor driver card to the printer. 2. Plug in the CAM motor of the EP drive assembly to the EP driver card electrically without installing it into printer. 3. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold buttons 3 and 6, then turn on the printer). 4. Touch MOTOR TESTS. 5. Touch CAM. Did the motor run? Replace EP drive assembly. See “Electrophotographic (EP) drive assembly removal”. Replace system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark X748

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie