Description: • Scanner ADF eject jam • Scanner static jam—ADF exit sensor • Remove all media present in the media path. • Check for obstructions in the media path. • Check the ADF media exit sensor for proper operation.
Remedy: 1 Make sure the mirror is clean: 1. Turn the printer off. 2. Open the ADF front cover. 3. Lift the flap as shown. Is the mirror clean? Go to step 2. Slightly dampen a soft, lintfree cloth with water, and clean the mirror. 2 Remove the ADF motor side cover. See “ADF motor side cover removal”. Is the ADF exit sensor cable (A) connected correctly? Go to step 3. Reseat the cable in connector. 3 Replace the ADF exit sensor. See “ADF exit sensor (with cable) removal”. Did the error clear? Problem resolved. Contact the next level of support.