Description: An error has occurred in the magenta channel of the printhead.
Remedy: 1 View the Event Log: 1. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays). 2. Touch EVENT LOG from Diagnostics Menu. 3. Touch Display Log. Has an 110.xx error occurred three times or more? Replace the printhead. See “Printhead removal, installation, and adjustment”. Go to step 2. 2 1. Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. 2. Check the cable in connector JPH1 for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the 5 V interlock switch. See “5 V interlock switch cable removal”. Go to step 3. 3 Measure the continuity across all of the fuses on the system board. Are any of the fuses blown? Replace the system board. See “System board removal”. Go to step 4. 4 1. Perform the printhead verification to check whether the new printhead solves the problem. See “Printhead verification”. 2. Perform the Servo Laser Test. See “Servo Laser Test”. Did the printhead motor pass the test? Replace the printhead. See “Printhead removal, installation, and adjustment”. Replace the system board. See “System board removal”.