Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 147.09 ... 147.25 — Lexmark X748dte

Code: 147.09 ... 147.25

Description: Motor Error Aligner motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check JFDPCK1 connector for proper connection and damage. 4. Reseat the connector. 5. POR the printer. 6. Perform a print test. Is the problem still present? Go to step 2. Problem resolved. 2 Check the cable in connector JFDPCK1 for pinch points, and the cable or connector for any 3 1. Disconnect the cable in connector JFDPCK1 on the system board, and then plug in the cable for the new paper pick mechanism. Let the paper pick assembly hang. 2. Close the front cover and install the waste box on the side of the printer. 3. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays). 4. Touch MOTOR TESTS. 5. Touch Align Motor. 6. Touch Forward. Does the aligner motor run? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.other damage. Is the cable damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 3.

← Xem tất cả mã lỗi Lexmark X748dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie