Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 941.00 — Lexmark X852e

Code: 941.00

Description: Service tray 1 failure Media tray 1 lift up / no tray failure The media tray 1 sensor (media level) is not turned on within the specified time after the tray 1 media feed lift motor is turned on. The media tray 1 switch (media size) detected no media tray
Remedy: 1 Check the media. Pull out the media tray 1, and visually check it. Is the media loaded in tray 1? Go to step 2. Load media properly. 2 Check the media tray. Replace media tray 1 with media tray 2. Is the replaced media tray lifted up? Go to step 3. Go to step 4. 3 Check the media tray. Are the tray lift sector gear 12T, of media tray 1, or surrounding parts damaged? Replace the media tray lift sector gear 12T or other damaged components. Go to step 4. 4 Check the tray 1 media feed lift motor for proper operation. Warning: Only perform this test with the paper tray assembly removed from the machine, or abnormal grinding noises will occur. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch Printer Tests. 4. Touch Tray 1 lift mtr. Does the tray 1 media feed lift motor operate properly? Go to step 8. Go to step 5. 5 Is the tray 1 media feed lift motor properly connected? Replace the media feed lift motor. Go to “Media feed lift motor removal”. Go to step 6. Replace the connection. 6 Check the tray 1 sensor (media level) for operation. 1. Enter the Diagnostics Menu. 2. Touch INPUT TRAY TESTS. 3. Touch Sensor test. 4. Touch Tray 1. 5. Touch Media level. Remove the media tray assembly. Move the pick roll, with your finger, up and down. Note: Avoid touching the rubber roll surface. Does the display on the operator panel change every time the sensing area is blocked? Go to step 8. Go to step 7. 7 Check the tray 1 sensor (media level) connection. Is the tray 1 sensor (media level) properly connected? Replace the sensor (media level). Go to “Sensor (media level) removal”. Replace the connection. 8 Check the tray 1 switch (media size) for proper connection. Is the switch connected properly? Replace the switch (media size). Go to “Switch (media size) removal”. Replace the connection. 9 Perform a print test. Does the error continue? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark X852e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie