Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 944.00 — Lexmark X852e

Code: 944.00

Description: Service tray 4 failure Media tray 4 lift up / no tray failure The tray 4 sensor (media level) is not turned on within the specified time after the tray 4 media feed lift motor is turned on. The tray 4 switch (media size) detected no tray.
Remedy: 1 Check the media. Pull out the tray 4, and visually check it. Is any media loaded in tray 4? Go to step 2. Load media properly. 2 Check the tray. Are the tray 4 lift gear assembly or the surrounding parts of it damaged? Go to step 3. Replace the tray 4 lift gear assembly or the obstacles. Go to “2000-sheet dual input (TTM)— tray 4 lift gear assembly removal”. 3 Check the tray 4 media feed lift motor for proper operation. Warning: Only perform this test with the paper tray assembly removed from the machine, or abnormal grinding noises will occur. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch Printer Tests. 4. Touch Tray 4 lift mtr. Does the tray 4 media feed lift motor operate properly? Go to step 6. Go to step 4. 4 Check the tray 4 media feed lift motor for proper connection. Is the above motor connected properly? Go to step 5. Replace the connection. 5 Check the 2TM/TTM controller card assembly and the printer engine card assembly for proper connection. Are connectors P541 and P413 on the above cards connected properly? Go to step 6. Replace the connection. 6 Check the tray 4 sensor (media level) for proper operation. 1. Enter the Diagnostics Menu. 2. Touch INPUT TRAY TESTS. 3. Touch Sensor Test. 4. Touch Tray 4. 5. Touch Media level. Remove the media tray assembly, and move the pick roll with your finger in an up and down motion. Avoid touching the rubber roll surface. Does the display on the operator panel change every time the sensing area of the above sensor is blocked? Go to step 8. Go to step 7. 7 Check the sensor (media level) for proper connection. Is the above sensor connected properly? Replace the sensor (media level). Go to “2000-sheet dual input (TTM)— sensor (media level) removal”. Replace the connection. 8 Check the tray 4 switch (TTM media size) for proper connection. Is the above switch connected properly? Replace the switch (TTM media size). Go to “2000-sheet dual input (TTM)— switch (TTM media size) removal”. Replace the connection. 9 Perform a print test. Does the error still occur? Replace the 2TM/ TTM controller card assembly. Go to “2000-sheet dual input (TTM)— 2TM/TTM controller card assembly removal”. Go to step 10. Problem solved. 10 Perform a print test. Does the error still occur? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark X852e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie