Description: Service fuser error Fuser operating temperature failure. Fuser temperature is not high enough during printing.
Remedy: 1 Check the fuser unit assembly for a media jam. Open the printer left door assembly, and check it. Is there a media jam in the fuser unit assembly? Go to the step 2. Remove the media. 2 Leave the printer powered on with the error code displayed for 10 minutes, then perform a POR. Does the error still occur? Go to step 3. Problem solved. 3 Check the fuser unit assembly for proper installation. Open the printer left door assembly, and check it. Is the fuser unit assembly installed properly? Go to step 4. Install the fuser unit assembly properly. 4 Check the fuser unit assembly connection. Is the fuser unit assembly properly connected? Go to step 5. Replace the connection. 5 Check the connection between the LVPS card assembly P525 and the printer engine card assembly P401. Are the cards connected properly? Replace the fuser unit assembly. Replace the connection. 6 Perform a print test. Does the error continue? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.