Code: 34
Description: Incorrect media, check tray 1 guides. Tray 1 media size mismatch in length The media length detected by the sensor (registration) after the media is fed from media tray 1 does not match the length detected by media tray 1 switch (media size).
Remedy: 1 Check the media. Pull out the media tray 1, and visually check it. Is the media properly loaded in media tray 1? Go to step 2. Load media properly. 2 Check the media. Pull out the media tray 1, and visually check it. Are the front media tray guide assembly, rear media tray guide, and media tray end guide of media tray 1 set correctly? Go to step 3. Set the guides properly. 3 Check the switch (media size) in media tray 1 for proper installation. Pull out the media tray 1, and visually check it Is the switch (media size) in media tray 1 installed correctly? Go to step 4. Install the switch (media size) for media tray 1 correctly. 4 Check the switch (media size) in tray 1 connection. Is the switch (media size) in tray 1 properly connected? Replace the switch (media size). Replace the connection.