Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.00 — Lexmark X860

Code: 920.00

Description: Service fuser error Fuser unit assembly on time failure During the warm-up period, the control thermistor does not detect the ready temperature even when the specified time is passed after the main lamp is turned on. During the standby period, the control thermistor does not detect the specified temperature even when the specified time is passed after the main lamp is on. During the standby period, the control thermistor does not detect the specified temperature even when the specified time is passed after the sub lamp in on. During idling, after power-on, the control thermistor does not detect the idling stop temperature even after the specified time is passed. During print, the control thermistor does not detect the specified temperature even when the specified time is passed after the main lamp is turned on. During print, the control thermistor does not detect the specified temperature even when the specified time is passed after the sub lamp is turned on.
Remedy: 1 Check the fuser unit assembly for a media jam. Open the printer left door assembly, and check it. Is there a media jam in the fuser unit assembly? Remove the media. Go to step 2. 2 Leave the printer powered on with the error code displayed for 10 minutes, then perform a POR. Does the error still occur? Go to step 3. Problem solved. 3 Check the fuser unit assembly for proper installation. Open the printer left door assembly, and check it. Is the fuser unit assembly installed properly? Go to step 4. Install the fuser unit assembly properly. 4 Check the fuser unit assembly connection. Is the fuser unit assembly properly connected? Go to step 5. Replace the connection. 5 Check between the LVPS card assembly P525 and the printer engine card assembly P401 for proper connection. Are the cards connected properly? Replace the fuser unit assembly. Replace the connection. 6 Perform a print test. Does the error continue? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark X860

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie