Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 202.01 — Lexmark X862

Code: 202.01

Description: Paper jam Check area A Sensor (fuser exit) off (too short) jam The sensor (fuser exit) is turned off earlier than the specified time after the sensor (fuser exit) is turned on.
Remedy: 1 Check the media position. Open the printer left door assembly, and visually check it. Does the media touch the sensor (fuser exit)? Remove the media. Go to step 2. 2 Check the fuser unit assembly for a media jam. Open the printer left door assembly, and check it. Is there a media jam in the fuser unit assembly? Remove the media. Go to step 3. 3 Check the fuser unit assembly for proper installation. Open the printer left door assembly, and check it. Is the fuser unit assembly installed properly? Go to step 4. Install the fuser unit assembly properly. Go to “Fuser unit assembly removal”. 4 Check the roll. Open the printer left door assembly, and check it. Is the transport roll assembly free of excess wear and contamination? Go to step 5. Clean or replace the transport roll assembly. Go to “Transfer roll guide assembly removal”. 5 Check the sensor (fuser exit) for operation. 1. Enter the Diagnostics Menu. 2. Touch BASE SENSOR TEST. 3. Touch Media Path. 4. Touch Fuser exit. Open the printer left door assembly, and check it. The area around the actuator is very hot. Allow the fuser area to cool before proceeding. Does the display on the operator panel change every time the sensor actuator is operated? Go to step 7. Go to step 6. 6 Check the sensor (fuser exit) connection. Is the sensor (fuser exit) properly connected? Replace the sensor (fuser exit). Go to “Sensor (fuser exit) removal”. Replace the connection. 7 Perform a print test. Does the error continue? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark X862

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie