Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 34 — Lexmark X862de

Code: 34

Description: Incorrect media, check tray 2 guides Tray 2 media size mismatch in length The media length detected by the sensor (registration) after the media is fed from media tray 2 does not match the length detected by media tray 2 switch (media size).
Remedy: 1 Check the media. Pull out the tray 2, and visually check it. Is the media loaded in tray 2 properly? Go to step 2. Load media properly. 2 Check the media. Pull out the tray 2, and visually check it. Are the front media tray guide assembly, rear media tray guide, and media tray end guide of tray 2 set correctly? Go to step 3. Set the guides properly. 3 Check the switch (media size) for tray 2 installation. Is the switch (media size) for tray 2 installed correctly? Pull out the tray 2, and visually check it. Go to step 4. Install the switch (media size) for tray 2 correctly. Go to “Switch (media size) removal”. 4 Check the switch (media size) for tray 2 connection. Is the switch (media size) for tray 2 properly connected? Replace the switch (media size). Go to “Switch (media size) removal”. Replace the connection. 5 Check the roll for tray 2. Pull out the tray 2, and check it. Is the feed roll, separation roll, and pick roll free of excess wear and contamination? Go to step 6. Clean or replace the feed roll, separation roll, and pick roll. Go to “Feed roll removal”, “Separation roll removal”, and “Pick roll removal”. 6 Open the printer left door assembly, and visually check it. Check the media position. Does the media touch the sensor (registration)? Remove the media. Go to step 7. 7 Check the roll. Open the printer left door assembly, and check it. Is the transport roll assembly free of excess wear and contamination? Go to step 8. Clean or replace the transport roll assembly. Go to “Transfer roll assembly removal”. 8 Check the roll. Open the printer left door assembly, and check it. Is the roll, in the registration roll assembly, free of excess wear and contamination? Go to step 9. Clean or replace the registration roll assembly. Go to “Registration roll assembly removal”. 9 Check the sensor (registration) for operation. 1. Enter the Diagnostics Menu. 2. Touch BASE SENSOR TEST. 3. Touch Media Path. 4. Touch Registration. Open the printer left door assembly, and check it. Does the display on the operator panel change every time the sensor actuator is operated? Go to step 11. Go to step 10. 10 Check the sensor (registration) connection. Is the sensor (registration) properly connected? Replace the sensor (registration). Go to “Sensor (registration) removal”. Replace the connection. 11 Check the registration clutch for proper operation. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch Printer Motor Test. 4. Touch Registrat clutch. Does the component make an audible clicking sound when it is operated? Go to step 13. Go to step 12. 12 Check the registration clutch connection. Is the registration clutch properly connected? Replace the registration clutch. Go to “Registration clutch assembly removal”. Replace the connection. 13 Perform a print test. Does the error continue? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark X862de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie