Code: 918.00
Description: Service std. bin 1 error Sensor (exit 1 media shift HP) failure The sensor (exit 1 media shift HP) is not turned on within the specified period after the exit 1 media shift motor is turned on.
Remedy: 1 Check the sensor (exit 1 media shift HP) for operation. 1. Enter the Diagnostics Menu. 2. Touch BASE SENSOR TEST. 3. Touch Media Path. 4. Touch Exit1 shift HP. Move the shift assembly, with your finger, in a side to side motion. Does the display on the operator panel change every time the sensing area is blocked? Go to step 3. Go to step 2. 2 Check the sensor (exit 1 media shift HP) for connection. Is the sensor (exit 1 media shift HP) connected? Replace the sensor (exit 1 media shift HP). Go to “Exit 1 media shift assembly removal”. Replace the connection. 3 Check the media shift motor for operation. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch Printer Motor Test. 4. Touch Exit1 shift motor. Note: A continuous operation check is allowed up to twice for each direction. Does the motor operate normally? Go to step 5. Go to step 4. 4 Check the media shift motor for connection. Is the above motor connected properly? Replace the media exit shift motor. Go to “Media shift motor removal”. Replace the connection. 5 Check the printer engine card assembly for connection P421 and the exit interface card assembly connector P431. Are the above cards connected properly? Replace the exit interface card assembly. Go to “Exit interface card assembly removal”. Replace the connection. 6 Perform a print test. Does the error still occur? Replace the printer engine card assembly Go to “Printer engine card assembly removal”. Problem solved.