Code: 121.05
Description: Fuser - fuser heater error
Remedy: 1 Is the fuser installed and seated properly? Go to step 2. Properly install the fuser. 2 Are CN02 and CN04 on the LVPS, and CN16 on the printhead control board properly connected? Go to step 3. Properly connect all the cables. 3 Check the fuser connectors on the fuser power cable for damage. Is there any damage? Replace the fuser power cable. Go to step 4. 4 Check the fuser power cable for continuity. Is there continuity? Go to step 5 Replace the fuser power cable 5 Replace the fuser. Does this fix the problem? Problem solved Go to step 6. 6 Replace the printhead controller board. Does this fix the problem? Problem solved Go to step 7. 7 Replace the LVPS. See “Low volt power supply removal”. Does this fix the problem? Problem solved Replace the fuser power cable.