Description: Check tray 3 guides Tray 3 media size mismatch error The media tray assembly 3 side guide or end guide is not properly set.
Remedy: 1 Check the media tray assembly 3 side guide. Is the above component set properly? Go to step 2. Properly set the media tray assembly side guide. 2 Check the media tray assembly 3 end guide. Is the above component set properly? Go to step 3. Properly set the media tray assembly end guide. 3 Check the media tray assembly for damage. Is the above component damaged? Replace the media tray assembly. Go to step 4. 4 Check the switch (media size) for proper connection. Is the above component properly connected? Replace the switch (media size) Replace the connection. 5 Perform a POR. Does the error remain when the power is turned off/on? Replace the upper printer engine card assembly. Go to “Upper printer engine card assembly removal”. Problem solved. 6 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP card assembly. Go to “RIP card assembly removal”. Problem solved.