Description: Service scanner failure CCD initialization (lamp off) failure The CCD does not make a correct output when light is absent.
Remedy: 1 Check the connection of the scanner controller card assembly. Are the connectors of the scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller card assembly. Go to “Scanner controller card assembly removal”. Problem solved. 3 Perform a POR. Does the error remain when the power is turned off/on again? Replace the scanner PS card assembly. Go to “Scanner PS card assembly removal”. Problem solved.