Code: 904.03
Description: Service transfer belt Sensor (2nd transfer roll retract HP) late error The sensing area of the sensor (2nd transfer roll retract HP) is not interrupted within the specified time when the 2nd transfer roll is moving to the home position.
Remedy: 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, go to step 2. 2 Check the sensor (2nd transfer roll HP) for proper operation. 1. Enter the Diagnostics Menu. 2. Touch Base Sensor Tests. 3. Touch Media Path. 4. Touch 2nd transfer roll retract HP. Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? Go to step 4. Go to step 3. 3 Check the sensor (2nd transfer roll HP) for proper connection. Is the above component properly connected? Replace the sensor (2nd transfer roll retract HP). Go to “Sensor (2nd transfer roll retract HP) removal”. Replace the connection. 4 Check the 2nd transfer roll retract motor for proper operation. 1. Enter the Diagnostics Menu. 2. Touch BASE SENSOR TESTS. 3. Touch Media Path. 4. Touch 2nd transfer roll retract HP. Does the above component operate properly? Go to step 6. Skip to step 5. 5 Check the 2nd transfer roll retract motor for proper connection. Is the above component properly connected? Replace the 2nd transfer roll retract motor assembly. Go to “2nd transfer roll retract motor assembly removal”. Replace the connection. 6 Perform a print test. Does the error continue? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved. 7 Perform a POR. Does the error occur when the power is turned off/on? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved.