Description: Service transfer belt Sensor (CMY transfer roll retract HP) lag or transfer belt unit assembly missing. The sensing area of the sensor (CMY transfer roll retract HP) remains interrupted within the specified time when the CMY transfer roll is moving from the home position.
Remedy: 1 Check the transfer belt unit assembly. Is the above component properly installed? To to step 2 Properly reinstall the transfer belt unit assembly. 2 Perform a POR. Does the error occur when the power is turned off/on? Go to step 3. Perform several print tests. If the problem remains, go to step 3. 3 Replace the transfer belt unit assembly. Go to “Transfer belt unit assembly removal”. Does the error remain? Replace the lower printer engine card assembly. Go to “Lower printer engine card assembly removal”. Problem solved.