Description: Service RIP engine Comm. RIP card assembly communication failure A communication error occurred between the printer engine card and the RIP card assembly.
Remedy: 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. 2 Turn the printer off for 60 seconds. Does the error occur when the power is turned off/on again? Go to step 3. Problem solved. 3 Check the RIP PCBA for connection. Is the above sensor connected properly? Replace the RIP PCBA. Go to “RIP PCBA removal”. Go to step 4. Replace the connection. 4 Perform a print test. Does the error still occur? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 5. Problem solved. 5 Perform a print test. Does the error still occur? Replace the upper engine PCBA. Go to “Upper printer engine PCBA removal”. Problem solved.