Description: The tray 1 paper exit sensor cable is unplugged.
Remedy: Step 1 Check the cable on the JMTR1 connector on the controller board for proper connection, and reseat if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Remove the media feeder. See “Media feeder removal”. b Check the cable on the sensor (media out), and reseat if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 Replace the media feeder. See “Media feeder removal”. Does the problem remain? Contact the next level of support. The problem is solved.