Code: 240.x5
Description: 240.15 240.25 240.35 240.45 Paper fed from tray [x] never cleared the sensor (MPF/pass-through).
Remedy: Step 1 a From the home screen, touch Settings > Device > Preferences. b Check if the paper size matches the size set on the tray guides. Does the paper size match the size set on the tray? Go to step 3. Go to step 2. Step 2 Change the paper size or adjust the size setting in the tray. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the duplex and MPF paper paths for paper jams and obstructions. Are the paper paths free of jams and obstructions? Go to step 5. Go to step 4. Step 4 Remove the paper jams and obstructions. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the tray paper path and drive gears for damage, and replace the tray if necessary. Does the problem remain? Go to step 6. The problem is solved. Step 6 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (MPF/pass.through). Does the sensor status change while toggling the sensor? Go to step 8. Go to step 7. Step 7 Check the sensor cable for proper connection and damage, and replace if necessary. Does the problem remain? Go to step 8. The problem is solved. Step 8 Check the sensor and sensor flag for damage. Is the sensor or sensor flag damaged? Go to step 9. Contact the next level of support. Step 9 Replace the isolation unit. See “Isolation unit removal”. Does the problem remain? Contact the next level of support. The problem is solved.