Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 990...992 — Lexmark XC4150

Code: 990...992

Description: 990.xx An equipment check condition oc991.xx An equipment check condition occurred in the controller card. 992.xx General software error.curred but unable to determine the exact component failure.
Remedy: Step 1 a Check if the firmware is updated, and then update the firmware if necessary. b Make sure that the printer supports the option. See the Printer, Option, and Stand Compatibility Guide. c Make sure that the option is properly attached to the printer or adjacent option. d Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Reseat the printer interface cable on the printer controller board. Does the problem remain? Go to step 3. The problem is solved. Step 3 Do the following to each option: a Reinstall the option. b Print a test page, and then check if the option is defective. Are all options properly working? Go to step 4. Contact the next level of support Step 4 Reseat the option interface cable. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the option interface cable for damage. Is the cable free of damage? Go to step 6. Go to step 7. Step 6 Replace the option interface cable. See “550-sheet tray interface cable removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the option controller board. See “550-sheet tray controller board assembly removal”. Does the problem remain? Contact the next level of support The problem is solved.

← Xem tất cả mã lỗi Lexmark XC4150

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie