Description: 655.84 The motor (K toner add) stalled. 656.84 The motor (C toner add) stalled. 657.84 The motor (M toner add) stalled. 658.84 The motor (Y toner add) stalled.
Remedy: Step 1 a Remove the affected toner cartridge, and then shake it. b Reinstall the toner cartridge. c Enter the Diagnostics menu, and then navigate to: Advanced Print Quality Samples > Advanced Print Quality Samples Check the test page. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the shutter under the affected toner cartridge for proper operation. Does the shutter properly open and retract? Go to step 3. Go to step 8. Step 3 Check the shutter for damage. Is the shutter free of damage? Go to step 4. Go to step 8. Step 4 a Remove the affected developer and PC unit combo. b Check the shutter at the rear of the developer and PC unit combo for proper operation. Does the shutter properly open and retract? Go to step 5. Go to step 6. Step 5 Check the shutter for damage. Is the shutter free of damage? Go to step 7. Go to step 6. Step 6 Replace the developer and PC unit combo. Does the problem remain? Go to step 7. The problem is solved. Step 7 Using a toner vacuum, clean the toner add tubes. Does the problem remain? Go to step 8. The problem is solved. Step 8 Replace the affected toner cartridge. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the affected toner add tube. See “Toner add tube removal”. Does the problem remain? Contact the next level of support. The problem is solved.