Remedy: Step 1 Check the pick roller for proper installation. Is the pick roller properly installed? Go to step 3. Go to step 2. Step 2 Reinstall the pick roller. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Motor tests > MPF pick b Touch Start. Does the motor run? Go to step 6. Go to step 4. Step 4 Check the motor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the motor. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the motor for noise. Does the motor sound abnormal or do the gears make a grinding sound? Go to step 7. Go to step 8. Step 7 Replace the MPF/reference edge gearbox. See “Reference edge motor gearbox removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Perform a print job. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.