Description: Jam is detected at the sensor (ADF multi.feed detect).
Remedy: Step 1 Check the original document: • Check the document for contaminations such as pieces of tape, paper clips, and staples. • Check the document for damage such as creases, tears, holes, and excess wear. Is the original document free of contaminations and damage? Go to step 3. Go to step 2. Step 2 a Remove the contaminations or replace the damaged original document. b Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Scanner quick feed Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the ADF paper path for paper fragments and contaminations such as pieces of tape, paper clips and staples. Is the paper path free of obstructions and contaminations? Go to step 5. Go to step 4. Step 4 Remove the obstructions and contaminations. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the condition of the ADF feed belt. Is the feed belt free from excess wear, contamination, and damage? Go to step 7. Go to step 6. Step 6 Clean or replace the feed belt. See “ADF feed belt removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the condition of the ADF separator roller. Is the separator roller free from excess wear, contamination, and damage? Go to step 9. Go to step 8. Step 8 Clean or replace the separator roller. See gADF separator roller removalh. Does the problem remain? Go to step 9. The problem is solved. Step 9 Load an undamaged document into the ADF tray, and then perform a copy job. Does the problem remain? Go to step 10. The problem is solved. Step 10 Replace the sensor (ADF multi.feed detect). Does the problem remain? Contact the next level of support. The problem is solved.