Description: 174.80 The photoconductor fan did not turn on. 174.81 The photoconductor fan did not turn off. 174.82 The photoconductor fan speed did not ramp up to the required level. 174.83 The photoconductor fan stalled. 174.84 The photoconductor fan ran too slow. 174.85 The photoconductor fan ran too fast.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the connection between the photoconductor fan and controller board. Is the fan properly connected? Go to step 4. Go to step 3. Step 3 Reseat the cable. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the photoconductor fan cable for damage. Is the cable free of damage? Go to step 6. Go to step 5. Step 5 Replace the cable. Does the problem remain? Go to step 6. The problem is solved. Step 6 Reset the printer. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the fan. Does the problem remain? Go to step 8. The problem is solved. Step 8 Reset the printer. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.