Description: 166.70 The motor (tray 2 elevator) does not turn on. 166.71 The motor (tray 2 elevator) does not turn off. 166.72 The motor (tray 2 elevator) fails to achieve the required speed. 166.73 The motor (tray 2 elevator) fails during operation. 166.74 The motor (tray 2 elevator) fails to reach the required speed. 166.75 The motor (tray 2 elevator) runs faster than the required speed.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Clear the motor (tray [x] elevator) gears of any obstructions. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the gears for damage. Are the gears free of damage? Go to step 5. Go to step 4. Step 4 Replace the gears. See “2200-sheet tray elevator gears removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the cable connecting the motor (tray [x] elevator) to the controller board. Is the motor properly connected? Go to step 7. Go to step 6. Step 6 Reseat the cable. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the cable for damage. Is the cable free of damage? Go to step 9. Go to step 8. Step 8 Replace the cable. Does the problem remain? Go to step 9. The problem is solved. Step 9 Reset the printer. Does the problem remain? Go to step 10. The problem is solved. Step 10 Replace the motor (tray [x] elevator). See “Motor (2200-sheet tray elevator) removal”. Does the problem remain? Contact the next level of support. The problem is solved.