Code: 402.51...402.55
Description: 402.51 Motor (HPT transport) did not turn off. 402.54 Motor (HPT transport) ran too fast. 402.55 Motor (HPT transport) ran too slow.
Remedy: Step 1 a Check the HPT and multiposition staple, hole punch finisher for proper installation. b Open door K and clear paper jams, fragments, and obstructions along the paper path. c Enter the Diagnostics menu, and then touch Output bin quick feed. d Select a bin and test type, and then start the test. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Motor tests b Find the motor (HPT transport and fan), and then touch Start. Does the motor run? Go to step 5. Go to step 3. Step 3 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 5. Go to step 4. Step 4 Reinstall or replace the motor. See “Motor (HPT transport) removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the HPT transport drive belt for misalignment and damage. Is the belt properly installed and free of damage? Go to step 7. Go to step 6. Step 6 Reinstall or replace the belt. See “HPT transport drive belt removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the HPT transport drive gear for misalignment and damage. Is the gear properly installed and free of damage? Go to step 9. Go to step Step 8 Reinstall or replace the gear. See “HPT transport gears removal”. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the HPT transport gear for wear and damage. Is the gear free of wear and damage? Go to step 11. Go to step 10. Step 10 Replace the gear. See “HPT transport gears removal”. Does the problem remain? Go to step 11. The problem is solved. Step 11 Check the HPT transport belts for misalignment and damage. Are the belts properly installed and free of damage? Go to step 13. Go to step 12. Step 12 Reinstall or replace the belts. See “HPT transport belts removal”. Does the problem remain? Go to step 13. The problem is solved. Step 13 Check the HPT front transport belt gear for wear and damage. Is the gear properly installed and free of damage? Go to step 15. Go to step 14. Step 14 Replace the gear. See “HPT front transport belt gear removal”. Does the problem remain? Go to step 15. The problem is solved. Step 15 Check the HPT alignment rollers for misalignment, wear, damage, and contamination. Are the rollers properly installed and free of wear, damage, and contamination? Go to step 17. Go to step 16. Step 16 Reinstall or replace the rollers. See “HPT alignment rollers removal”. Does the problem remain? Go to step 17. The problem is solved. Step 17 Check the HPT transport idler roller for misalignment and damage. Is the roller properly installed and free of damage? Go to step 19. Go to step 18. Step 18 Reinstall or replace the roller. See “HPT transport idler roller removal ”. Does the problem remain? Go to step 19. The problem is solved. Step 19 Check the HPT transport rollers for misalignment, wear, damage, and contamination. Are the rollers properly installed and free of wear, damage, and contamination? Go to step 21. Go to step 20. Step 20 Reinstall or replace the rollers. See “HPT transport rollers removal”. Does the problem remain? Go to step 21. The problem is solved. Step 21 Reseat the HPT controller board cables, and then check the cables for damage. Are the cables free of damage? Go to step 23. Go to step 22. Step 22 Replace the cables. See “HPT controller board removal”. Does the problem remain? Go to step 23. The problem is solved. Step 23 Replace the controller board. See “HPT controller board removal”. Does the problem remain? Go to step 24. The problem is solved. Step 24 Replace the HPT. Does the problem remain? Contact the next level of support. The problem is solved.