Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on.
Remedy: Step 1 Check the paper path for paper jams and fragments. Is the paper path free of jams and fragments? Go to step 3. Go to step 2. Step 2 Remove the paper jams and fragments. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Sensor tests b Find the sensor (ADF 1st scan). Does the sensor status change while toggling the sensor? Go to step 6. Go to step 4. Step 4 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the sensor. Does the problem remain? Go to step 6. The problem is solved. Step 6 Load an undamaged document into the ADF tray, and then perform a copy job. Does the problem remain? Contact the next level of support. The problem is solved.