Description: 179.80 The HVPS fan did not turn on. 179.81 The HVPS fan did not turn off. 179.82 The HVPS fan speed did not ramp up to the required level. 179.83 The HVPS fan stalled. 179.84 The HVPS fan ran too slow. 179.85 The HVPS fan ran too fast.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the connection between the HVPS fan and controller board. Is the fan properly connected? Go to step 4. Go to step 3. Step 3 Reseat the cable. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the HVPS fan cable for damage. Is the cable free of damage? Go to step 6. Go to step 5. Step 5 Replace the cable. Does the problem remain? Go to step 6. The problem is solved. Step 6 Reset the printer. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the HVPS fan. See “HVPS fan removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Reset the printer. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.