Code: 153.00, 153.06
Description: 153.00 The motor (transport) failed. 153.06 The motor (transport) did not run at the correct timing.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Transport tray Does the motor run? Go to step 6. Go to step 3. Step 3 a Reseat the transport motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Check the transport motor belt for proper tension, and adjust if necessary. b Check the transport motor gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the motor (transport). See “Motor (transport) removal”. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.