Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 164.04 — Lexmark XM9155

Code: 164.04

Description: The motor (tray 4 feed) did not reach the required speed.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 a Check the tray 4 feed belt for proper tension, and adjust if necessary. b Check the feed belt and gears for wear or damage, and replace if necessary. See “2 x 500-sheet tray 4 transport belts and gears removal”. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the tray 4 feed, pick, and separator rollers for wear or damage, and replace if necessary. Note: If the page count is over 50K, then clean the rollers. Does the problem remain? Go to step 4. The problem is solved. Step 4 Replace the motor (2 x 500-sheet tray 4 feed). See “2 x 500-sheet tray feed and transport motors removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the 2 x 500-sheet tray controller board pins for damage, and replace if necessary. See “2 x 500-sheet tray controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark XM9155

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie